Bumper brace mod

After few hits bottom2 screws to mount a bumper brace get stripped or get lose, then I put a longer screws hoping to reach deeper, but that never worked.

because the hole is not deep enough and I'm spinning a longer screw on same depth hole that is shorter than that screw, perhaps making it worse.

yes I drilled out with a 3/32 bit and tada~ little longer screws fits nice and tight.

I guess I can use small nuts in there but I think Losi only use a nut in middle for purpose to save the chassis.

when I get a new bumper brace I will just drilled it out from the beginning.