Indoor carpet racing at Staten island, NY

For all of us who had our heart broken yesterday, here is a good news for you.

the SIRCC, where I raced allot with them last summer got permit granted by NYC Park dept to have a race in one of their indoor facility.

here is a link to the thread about it, should be around 80ft by 50ft size carpet track.

The address is: Pier Ste 6 Murry Hulbert Ave, Staten Island, NY‎

stay tuned!

The end of a dream

There will be no indoor track in queens by NYCH.

Raced at RCM yesterday

first race in 2.5 month and the place had no heat.

16F outdoor snow storm!

36F! indoor!!

the track had no traction but their local had their work done and had some traction.

also the freezing car, my frozen blue screen brain caused few shattered parts.

enough about crying.

I did few testing on the new sweep tires and the New Tekin 203 software, my 17.5 duo 2 equipped machine ran in 10.5 speed, it was just insane to drive.

I tried few setup change to gain rear traction but I don't think I went soft enough on the springs or long enough on a camber rod, my shocks felt like a 800CST oil with a 400CST in it!

I Qualified on 4th behind 3 top Local drivers and DNF in a Main race with a shattered servo horn.

they might have a heater installed by this weekend, I will make sure they have heaters installed before make a trip to their annual January JAM on Jan/17/2010

The Power of a Tekin 203

This crime scene was done by Robbie dodge (current ROAR TC champion) he just tapped throttle on the bench for the first time and see what happened!

thats with a 17.5 too!!!!

I tried mine with out a pinion this morning, as soon as I squeezed the throttle I heard some crazy screaming from my motor that I never heard before! I had to let off the throttle right away!

I can't wait till this Sunday!

for other ESC users, this Sunday will be a crime scene!

Happy new year!

Hope you all have a wonderful new year and peace on earth!

Tekin 203 WOW

I just tried the new 203 and all I can say is WOW. (more to come)

nice way to do it! increasing RPM/timing.

same darkside looking interface, always a dark horse!

Look what I found under the Tree!

a Mint condition THE Ungar UTC-300! Look at that fresh sponge!!!

Multi class racing here I come!

Going to RCM this Sunday

Finally I will get to race my be loving Type-R.

I will try a new Tekin software, ALL NEW Sweep tires, and all new carpet set up for my chassis.

RCMadness track at Conneticut

There track is finally done indoor looking great, we have a lots of snow today and RCM don't have the heat either so we might trying to make it up there next week.

that's a day after the Christmas!! Horay!

But the question is when does NYC hobby going to open there new track!

MAN, I'M DYING TO GO TO TC RACE!

NO TC RACE FOR 2MOTH DRIVE JOHNY CRAZY!!!

I must gone mad for sure! that pinion looks bigger than that Spur gear!

Barry VS Paulie Last weekend at WCRCR

Baker passed Lemieux on outside.........

Awesome WCRCR Track at SOCAL

Excellent filming, editing oh yes! Metallica rule!

Spring etching

Can someone do this for us?

I know next best thing is dremel notches on a spring coils, 10.5=1, 12.5=2notches...

Those rating stickers comes off every time you need them, YUK!

Rear camber rod mod

I saw few ppl asking waht is most HD ball cup is cause their rear ball cups keep popping, cause rear camber rod is tilted backwards by default if you hit somethin by rear wheel ( ex: chicanes) ball cup does pop and your done for that heat!

and replacing this with other brand is hack! or even a old closed cap style Losi ball cups is not an good idea you will need to pop em out every time you working on it, that will makes your car sloppy and ugly!

That will makes your car look like this!!!

please ppl you can stop right there!!!

Don't do this to your beautiful type-R please.

I did manage prevent this by using a small flathead screws and also replace mounting round head screws with short one as I post it here but problem is I can't insert open-end wrench between the ball cups and rear shock tower.

and here is what I did.

I put a longer flat head screw from front and locked it with a lock nut from the back.

there you have it folks, please keep your type-R beautiful.

RCMadness start building a track

I'm so glad to write RCMadness who has been in this business for long time at CT finally start building a carpet track in their newly moved premises

In my guess Dec/20/2009 should be our targeted date to make first trip, finally I can start race my type-R again!!!

2WD TC to save the class?

From my Experience with an 1/10th off road class, a 2WD chassis can be more popular than current 4WD chassis in TC, this might bring more people back to this hobby for following reasons.

1: Lower chassis cost/ IMO a kit around $200 is possible

2: Less wear/economical running cost

3: Less damaged on a crash/ lots of ppl went to 1/8th off road cuz car don't break after a reasonable crash.

4: compare to smaller scale cars more room for electrics / I don't mean to say anything bad about mini-z or cup racing cars but to me they are too sensitive to set up change or too compact for human's finger size

5: Roomy layout don't need a low profile servo, Micro RX or and micro ESC

6: limited over all traction requires only a controllable horse power.

7: last but not least/ get rid of body rules. people love to race their dream cars than a Mazda 6. just like an RCGT rules lets drive some fancy cars!

what do you think?

I started racing with 1/10th off road 2WD and always enjoyed 4WD every chance I had, but almost every one quit running 4WD offroad so soon beacuase of opposite of above reasons, 1/10th electric 4WD off road was never a popular class and lots of ppl thought if the AE built one they will come but that didn't happened, also we all noticed 1/10th gas TC race getting smaller every season but 1/10th off road 2WD been popular till today.

with very sophisticated suspension logics and tires/chemicals available today I do believe we will have enough traction in any surface that we been run with 2WD tranny.

actually that remind me I drove my novice buddy's car fine around a track when he asked me to drive cuz car felt weired, I found a problem for him, his car lost a spool and had only rear wheel drive in that run.

there is lots of opinions on the web about how we can rejuvenate this once was popular class .

ppl talking about eliminated few class , such as killing the 13.5, entire foam or they even talking about folding the Mod class!

or there is idea about going to 1 cell on all sedan to replaced all our recently purchased 2cell Lipo!

to me that don't make much sense at all

so in my opinion this class can attract more racers and live longer with 2WD chassis.

My guess for Black Diamond by Advanced Electronics

My guess for this ESC algorithm is this ESC monitor how much amps draw and see if amps draw increased or decreased on throttle position.

when throttle getting pumped or at high position and amps draw dropping than it increase timing.

like when you drive a 1:1 scale car, when RPM gets steady you will changed to next gear.

current Tekin software increased Timing (RPM) after set delay and that only works if you hitting same line every time coming in to straightway.

but with amps sensing, as soon as top speed is reached with fixed timing (1st gear) it kicks in with higher timing right away to reach faster speed sooner.

Hottest talk in town!

Advanced Electronics (AE) debut in last IIC and kicked butt with many controversy then team CRC(importer of this ESC in US) came back to the Cleveland race and done it again, this time rest of the lapped drivers talking about BAN this ESC!

like old say "Bad publicity is still a good publicity" nobody can banned anything like this, it's proven in history (of RC racing) instead of go back to their drawing board and burn mid night oil and get some work done most of this ppl just wanted to whine and cry about it, more crying you do more people will pay attention to this ESC and end up buying one.

the price of this ESC is $400 USD as of Nov/2009 but I believe this is first batch in factory in Sweden came to US in FEDEX, once more demands and more production units take a place with slower shipping, I know this cost can be adjusted in reachable price.

IMO, Let them get paid for their hard work!

here is the thread in RCtech for this ESC

lipo battery price dropping

keep your eyes open or hang on till Christmas time, we might see some huge dropping on Lipo battery

also there is news out there who also found Lipo battery safer (no explosion) and we might don't have to see this Lipo battery get replaced by Li Fe battery so quick cause of safety reasons.

Battery tray tweak

I was rebuilding my car to get ready for the Queens track grand opening on end of this month, which got delayed till next year!

anyway I was tweaking my car to get flatten it out then found out even a Lipo plastic tray does make a chassis quite stiff and tweaked

I removed my battery tray only to find out chassis is slightly tweaked with a tray in the place, I think this only happen if you tape your battery to the tray instead of foam tapes on place under the upper deck.

then I was thinking about the solution for last few days and came up with following.

1: enlarge those tray hole and countersink larger so placement of battery mounting holes don't interfere with the chassis tweak.

2:milled out 1mm off the tray's mounting ears and upright Alu stands 1 mm to mount silicone seal (from shock) between Alu stands off and a tray.

this way my chassis can stay flat and have natural flex on corners with cushion of silicone seals, I'll post few pics as soon as I done it, on here and maybe on the RCtech too

NYC premire 1st RC movie ever !

Hope to see all you guys tonight!

http://www.facebook.com/pages/Carpet-Racers/99973807297

Real movie about the RC car racing?

we been talking about how the "speed" channel should have a coverage for the RC racing and how real media give no coverage to us.

well here is the chance we been talking about, right here in NYC!

I already bought a ticket for the movie " Carpet racers" showing at Queens Int Film festival here at Astoria, Queens, NYC.

I watched the trailer and extra footage few times and it does looks great, I also visit director "Jay Thames" page at IMDB.COM and found his films are very interesting or I should say intriguing.

all you RC racers around the NYC need to be there or keep your paragon can shut next time when we get low turn out at a local track.

Early prototype pictures of the XXX-S and a Type-R

by looking at the color I bielive type-R is belong to Todd Hodge

Tuning my car for the carpet season

We all been heard new carpet/asphalt track will be opening soon here in Queens, NY

yes lucky me, I have a mini-Z track with in 3minutes from my home and the new track would be within 15min distance MAX! man my life is good!

anyway I ran similar to Mike Haynes set up last year at 360, I did okay with that, this year I have few ideas I been thinking to make my car run faster, as I progress my work toward end of Nov, I will share some thoughts on this blog.